The largest size of the 20″ wheel models in the Race Lite series is the Pro XL model. The 21″ top tube frame accommodates larger racers who need more front end room while the rest of the geometry and frame spec carries forward from the Pro model. Also found on the Pro XL are the same high performance sealed bearing wheel set, 2 piece alloy cranks, PTC with press fit BB86 sealed bearing bottom bracket and fork/bar/stem front end controls as the Pro. Pro XL NOTE: Pricing is subject to change.
|Frame||6061 Series Alloy PTC Disc Frame w/ Internal Headtube, Internal Cable Routing & Smooth Welding|
|Fork||Full Cr-Mo 1 1/8″ Threadless w/ Tapered Legs|
|Cranks||2-pc Alloy w/ 24mm Hollow Spindle, 175mm|
|Bottom Bracket||Press-Fit BB86, Sealed Bearing|
|Pedals||DX Alloy, 9/16″|
|Tires||Kenda “Konversion” 20 x 1.95″ Front / 20 x 1.75″ Rear|
|Front Hub||Low Flange Alloy 36h, Sealed Bearing|
|Rear Hub||Alloy Disc Cassette 36h, Sealed Bearing, 6-Bolt|
|Rims||20″ Alloy 36h, Double Wall|
|Brake||Promax DSK-300 Mechanical Disc Brake w/ 160mm Rotor|
|Brake Lever||Promax XL-373 Two Finger|
|Handle Bar||Full Cr-Mo, 8″ Rise|
|Stem||Forged Alloy Top-Load, 45mm Ext.|
|Headset||Sealed Internal 1 1/8″|
|Seat||Haro Slim Plastic Pivotal|
|Seat Post||Alloy Pivotal, 27.2mm|
|Seat Post Clamp||Alloy, 31.8mm|
Want more information? Send us a message below.
Let us know your preferred time and date for a test drive. We’ll be in touch to confirm.
We do not offer test rides in wet weather.
A current drivers licence is required for test rides. You can upload a photo of your licence below, or supply it on the day of the test ride.